<br><font size=2 face="sans-serif">Once again denied...ugh..</font>
<br>
<br><font size=2 face="sans-serif"> CPAN.pm: Going to build L/LU/LUKKA/PDL-1.99989.tar.gz</font>
<br>
<br><font size=2 face="sans-serif">Checking if your kit is complete...</font>
<br><font size=2 face="sans-serif">Looks good</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::pod</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::PP</font>
<br><font size=2 face="sans-serif">Trying to figure out POSIX threads support
...</font>
<br><font size=2 face="sans-serif"> Saw pthread.h.
Fine.</font>
<br><font size=2 face="sans-serif"> Nope, your
perl was not linked against pthread library</font>
<br><font size=2 face="sans-serif"> ==> PDL
will be built without POSIX thread support. Shame on you.</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Core</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Ops</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Primitive</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Slices</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Tests</font>
<br>
<br><font size=2 face="sans-serif">Using distribution version of functions:
ndtri blas eigens simq nan infinity acosh asinh atanh erf erfc rint j0
j1 y0 y1 jn yn</font>
<br><font size=2 face="sans-serif">Using system version of functions:</font>
<br>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Math</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Demos</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Pod::Parser</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Doc</font>
<br><font size=2 face="sans-serif"> Building
TriD extension. Turn off WITH_3D if there are problems</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::PGPLOT</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::IIS</font>
<br>
<br><font size=2 face="sans-serif"> Not building PDL::Graphics::Karma,
turn on WITH_KARMA if this is incorrect</font>
<br>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lMesaGL</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lMesaGLU</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lGL</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lGLU</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::OpenGL</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lMesaGL</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lMesaGLU</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lGL</font>
<br><font size=2 face="sans-serif">Note (probably harmless): No library
found for -lGLU</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::OpenGLQ</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::TriD::Rout</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::VRML</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Graphics::TriD</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::FastRaw</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::Misc</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::FlexRaw</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::Pnm</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::Browser</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::IO::NDF</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL</font>
<br><font size=2 face="sans-serif">WARNING: Dir is not a known parameter.</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Opt::Simplex</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Opt</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::ImageRGB</font>
<br><font size=2 face="sans-serif">(ExtUtils Version 1.08)</font>
<br>
<br><font size=2 face="sans-serif">Unable to find a fortran compiler using
names: g77 f77 fort77 at ExtUtils/F77.pm line 405.</font>
<br><font size=2 face="sans-serif">Compilation failed in require at (eval
105) line 2.</font>
<br><font size=2 face="sans-serif">BEGIN failed--compilation aborted at
(eval 105) line 2.</font>
<br>
<br><font size=2 face="sans-serif"> ExtUtils::F77 module not
found. Will not build PDL::Slatec</font>
<br>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::FFT</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Filter</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Image2D</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::ImageND</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::CallExt</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL::Lib</font>
<br><font size=2 face="sans-serif">Writing Makefile for PDL</font>
<br><font size=2 face="sans-serif">Writing Basic/Core/Config.pm</font>
<br><font size=2 face="sans-serif">make[1]: Entering directory `/home/root/.cpan/build/PDL-1.99989/Basic'</font>
<br><font size=2 face="sans-serif">cp LiteF.pm ../blib/lib/PDL/LiteF.pm</font>
<br><font size=2 face="sans-serif">cp default.perldlrc ../blib/lib/PDL/default.perldlrc</font>
<br><font size=2 face="sans-serif">cp AutoLoader.pm ../blib/lib/PDL/AutoLoader.pm</font>
<br><font size=2 face="sans-serif">cp PDL.pm ../blib/lib/PDL.pm</font>
<br><font size=2 face="sans-serif">cp Lite.pm ../blib/lib/PDL/Lite.pm</font>
<br><font size=2 face="sans-serif">cp Options.pm ../blib/lib/PDL/Options.pm</font>
<br><font size=2 face="sans-serif">make[2]: Entering directory `/home/root/.cpan/build/PDL-1.99989/Basic/Pod'</font>
<br><font size=2 face="sans-serif">cp Impatient.pod ../../blib/lib/PDL/Impatient.pod</font>
<br><font size=2 face="sans-serif">cp Internals.pod ../../blib/lib/PDL/Internals.pod</font>
<br><font size=2 face="sans-serif">cp Tips.pod ../../blib/lib/PDL/Tips.pod</font>
<br><font size=2 face="sans-serif">cp Dataflow.pod ../../blib/lib/PDL/Dataflow.pod</font>
<br><font size=2 face="sans-serif">cp Delta.pod ../../blib/lib/PDL/Delta.pod</font>
<br><font size=2 face="sans-serif">cp FAQ.pod ../../blib/lib/PDL/FAQ.pod</font>
<br><font size=2 face="sans-serif">cp Philosophy.pod ../../blib/lib/PDL/Philosophy.pod</font>
<br><font size=2 face="sans-serif">cp Objects.pod ../../blib/lib/PDL/Objects.pod</font>
<br><font size=2 face="sans-serif">cp Indexing.pod ../../blib/lib/PDL/Indexing.pod</font>
<br><font size=2 face="sans-serif">cp Intro.pod ../../blib/lib/PDL/Intro.pod</font>
<br><font size=2 face="sans-serif">cp PP.pod ../../blib/lib/PDL/PP.pod</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Impatient.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Internals.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Tips.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Dataflow.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Delta.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Philosophy.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::FAQ.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Indexing.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::Objects.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/pdl.1</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man1/PDL::PP.1</font>
<br><font size=2 face="sans-serif">make[2]: Leaving directory `/home/root/.cpan/build/PDL-1.99989/Basic/Pod'</font>
<br><font size=2 face="sans-serif">make[2]: Entering directory `/home/root/.cpan/build/PDL-1.99989/Basic/Gen'</font>
<br><font size=2 face="sans-serif">/usr/bin/perl PP/dump.pp > PP/Dump.pm.tmp</font>
<br><font size=2 face="sans-serif">mv PP/Dump.pm.tmp PP/Dump.pm</font>
<br><font size=2 face="sans-serif">cp PP.pm ../../blib/lib/PDL/PP.pm</font>
<br><font size=2 face="sans-serif">cp PP/Var.pm ../../blib/lib/PDL/PP/Var.pm</font>
<br><font size=2 face="sans-serif">cp PP/CType.pm ../../blib/lib/PDL/PP/CType.pm</font>
<br><font size=2 face="sans-serif">cp PP/PDLCode.pm ../../blib/lib/PDL/PP/PDLCode.pm</font>
<br><font size=2 face="sans-serif">cp PP/SymTab.pm ../../blib/lib/PDL/PP/SymTab.pm</font>
<br><font size=2 face="sans-serif">cp PP/PdlParObj.pm ../../blib/lib/PDL/PP/PdlParObj.pm</font>
<br><font size=2 face="sans-serif">cp PP/Signature.pm ../../blib/lib/PDL/PP/Signature.pm</font>
<br><font size=2 face="sans-serif">cp PP/XS.pm ../../blib/lib/PDL/PP/XS.pm</font>
<br><font size=2 face="sans-serif">cp PP/Dump.pm ../../blib/lib/PDL/PP/Dump.pm</font>
<br><font size=2 face="sans-serif">cp PP/Struct.pm ../../blib/lib/PDL/PP/Struct.pm</font>
<br><font size=2 face="sans-serif">cp PP/Dims.pm ../../blib/lib/PDL/PP/Dims.pm</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man3/PDL::PP::Signature.3</font>
<br><font size=2 face="sans-serif">Manifying ../../blib/man3/PDL::PP::Dump.3</font>
<br><font size=2 face="sans-serif">make[2]: Leaving directory `/home/root/.cpan/build/PDL-1.99989/Basic/Gen'</font>
<br><font size=2 face="sans-serif">make[2]: Entering directory `/home/root/.cpan/build/PDL-1.99989/Basic/Core'</font>
<br><font size=2 face="sans-serif">/usr/bin/perl "-I../../blib/arch"
"-I../../blib/lib" Types.pm.PL Types.pm</font>
<br><font size=2 face="sans-serif">Extracting Types.pm (with variable substitutions)</font>
<br><font size=2 face="sans-serif">/usr/bin/perl "-I../../blib/arch"
"-I../../blib/lib" pdl.h.PL pdl.h</font>
<br><font size=2 face="sans-serif">Extracting pdl.h (with variable substitutions)</font>
<br><font size=2 face="sans-serif">/usr/bin/perl "-I../../blib/arch"
"-I../../blib/lib" pdlsimple.h.PL pdlsimple.h</font>
<br><font size=2 face="sans-serif">Extracting pdlsimple.h (with variable
substitutions)</font>
<br><font size=2 face="sans-serif">cp Version.pm ../../blib/lib/PDL/Version.pm</font>
<br><font size=2 face="sans-serif">cp Exporter.pm ../../blib/lib/PDL/Exporter.pm</font>
<br><font size=2 face="sans-serif">cp pdlcore.h ../../blib/lib/PDL/Core/pdlcore.h</font>
<br><font size=2 face="sans-serif">cp Dbg.pm ../../blib/lib/PDL/Dbg.pm</font>
<br><font size=2 face="sans-serif">cp pdlsimple.h ../../blib/lib/PDL/Core/pdlsimple.h</font>
<br><font size=2 face="sans-serif">cp pdl.h ../../blib/lib/PDL/Core/pdl.h</font>
<br><font size=2 face="sans-serif">cp Core.pm ../../blib/lib/PDL/Core.pm</font>
<br><font size=2 face="sans-serif">cp typemap.pdl ../../blib/lib/PDL/Core/typemap.pdl</font>
<br><font size=2 face="sans-serif">cp Config.pm ../../blib/lib/PDL/Config.pm</font>
<br><font size=2 face="sans-serif">cp Types.pm ../../blib/lib/PDL/Types.pm</font>
<br><font size=2 face="sans-serif">cp Basic.pm ../../blib/lib/PDL/Basic.pm</font>
<br><font size=2 face="sans-serif">cp pdlthread.h ../../blib/lib/PDL/Core/pdlthread.h</font>
<br><font size=2 face="sans-serif">cp Dev.pm ../../blib/lib/PDL/Core/Dev.pm</font>
<br><font size=2 face="sans-serif">cp pdlmagic.h ../../blib/lib/PDL/Core/pdlmagic.h</font>
<br><font size=2 face="sans-serif">/usr/bin/perl -e 'use ExtUtils::Mksymlists;
\</font>
<br><font size=2 face="sans-serif">Mksymlists("NAME" => "PDL::Core",
"DL_FUNCS" => { }, "FUNCLIST" => [], "DL_VARS"
=> []);'</font>
<br><font size=2 face="sans-serif">/usr/bin/perl /sftw/perl5.8.7/lib/5.8.7/ExtUtils/xsubpp
-typemap /sftw/perl/lib/5.8.7/ExtUtils/typemap -typemap typemap Core.xs
> Core.xsc && mv Core.xsc Core.c</font>
<br><font size=2 face="sans-serif">cc -c -D_ALL_SOURCE -D_ANSI_C_SOURCE
-D_POSIX_SOURCE -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN -I/usr/local/include
-q32 -D_LARGE_FILES -qlonglong -O -DVERSION=\"1.99989\"
-DXS_VERSION=\"1.99989\" "-I/sftw/perl/lib/5.8.7/aix/CORE"
Core.c</font>
<br><font size=2 face="sans-serif">"pdlmagic.h", line 123.8:
1506-234 (W) Expecting a new-line character on #endif directive.</font>
<br><font size=2 face="sans-serif">"Core.xs", line 111.26: 1506-045
(S) Undeclared identifier sv_undef.</font>
<br><font size=2 face="sans-serif">"Core.xs", line 617.45: 1506-045
(S) Undeclared identifier na.</font>
<br><font size=2 face="sans-serif">make[2]: *** [Core.o] Error 1</font>
<br><font size=2 face="sans-serif">make[2]: Leaving directory `/home/root/.cpan/build/PDL-1.99989/Basic/Core'</font>
<br><font size=2 face="sans-serif">make[1]: *** [subdirs] Error 2</font>
<br><font size=2 face="sans-serif">make[1]: Leaving directory `/home/root/.cpan/build/PDL-1.99989/Basic'</font>
<br><font size=2 face="sans-serif">make: *** [subdirs] Error 2</font>
<br><font size=2 face="sans-serif"> /opt/freeware/bin/make --
NOT OK</font>
<br><font size=2 face="sans-serif">Running make test</font>
<br><font size=2 face="sans-serif"> Can't test without successful
make</font>
<br><font size=2 face="sans-serif">Running make install</font>
<br><font size=2 face="sans-serif"> make had returned bad status,
install seems impossible</font>
<br>
<br><font size=2 face="sans-serif">I even went through the trouble of blowing
away my perl install, and compiling without threads to see if it's a threading
issue (same error)...Sigh... Anyone?</font>
<br>
<br>
<br><font size=2 face="sans-serif">Jonathan Kaufman<br>
<br>
Foot Locker Corporate Services, Inc.<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=29%>
<table width=100%>
<tr valign=top>
<td width=42%>
<td width=57%><font size=1 face="sans-serif"><b>Chris Hall</b></font>
<br><font size=1 face="sans-serif">Sent by: rt-users-bounces@lists.bestpractical.com</font>
<p><font size=1 face="sans-serif">02/03/2006 05:58 AM</font></table>
<br>
<td width=70%>
<table width=100%>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td valign=top><font size=1 face="sans-serif">rt-users@lists.bestpractical.com</font>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td valign=top>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td valign=top><font size=1 face="sans-serif">Re: [rt-users] Scalar::Util::Weak
Problem</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=2><tt>If you 'install XS' it will download PDL-1.99989 for
some reason. <br>
Install that, then install scalar-utils again. That seemed to work for
me.<br>
<br>
- Chris<br>
<br>
jkaufman@footlocker.com wrote:<br>
> Hello all,<br>
> <br>
> I am once again attempting (unsuccessfully at the moment) to get RT
3.5.7 <br>
> installed on AIX. I'm compiling everything from scratch on an AIX
v5.2 <br>
> machine using IBM Vac 7.x.<br>
> <br>
> I've compiled Perl v5.8.7 using the following Configure:<br>
> <br>
> sh Configure -des -Dusenm -Dprefix=/sftw/perl -Duseithreads
<br>
> -Dusemultiplicity -Duseperlio \<br>
> -Duselargefiles -Dd_sigaction -Dlibpth='/lib /usr/lib /usr/ccs/lib'
\<br>
> -Dlibs='-lbind -lnsl -ldbm -ldb -ldl -lld -lm -lcrypt -lpthreads -lc
-lbsd <br>
> -lPW' \<br>
> -Dccflags='-q32 -D_LARGE_FILES -qlonglong' -Dlddlflags='-bM:SRE -lc_r'
<br>
> -Dldflags='-b32'<br>
> <br>
> I "borrowed" the ccflags/lddlflags/ldflags/libs from the
compile flags <br>
> used on the perl that ships with Aix v5.2 BTW.<br>
> <br>
> <br>
> I've gotten a number of the perl modules to install, but the Weaken
part <br>
> of Scalar::Util doesn't want to compile, and that's causing other
modules <br>
> to barf during their tests. I can only assume that this is an
important <br>
> part of Scalar::Util and I should try to figure out why it's not <br>
> working...I don't have a clue, so I'm hoping someone else on the list
<br>
> knows...<br>
> <br>
> Here is the output during the installation of Scalar::Util<br>
> <br>
> [root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] >
perl <br>
> Makefile.PL<br>
> Checking if your kit is complete...<br>
> Looks good<br>
> Writing Makefile for List::Util<br>
> [root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] >
make<br>
> cp lib/List/Util.pm blib/lib/List/Util.pm<br>
> cp lib/Scalar/Util.pm blib/lib/Scalar/Util.pm<br>
> /usr/bin/perl -Iinc -e 'use ExtUtils::Mksymlists; \<br>
> Mksymlists("NAME" => "List::Util", "DL_FUNCS"
=> { }, "FUNCLIST" => [], <br>
> "DL_VARS" => []);'<br>
> /usr/bin/perl -Iinc /sftw/perl/lib/5.8.7/ExtUtils/xsubpp -typemap
<br>
> /sftw/perl/lib/5.8.7/ExtUtils/typemap Util.xs > Util.xsc
&& mv Util.xsc <br>
> Util.c<br>
> cc_r -c -q32 -D_LARGE_FILES -qlonglong -D_ALL_SOURCE -D_ANSI_C_SOURCE
<br>
> -D_POSIX_SOURCE -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN <br>
> -DNEED_PTHREAD_INIT -I/usr/local/include -q32 -D_LARGE_FILES -qlonglong
-O <br>
> -DVERSION=\"1.18\" -DXS_VERSION=\"1.18\"
<br>
> "-I/sftw/perl/lib/5.8.7/aix-thread-multi/CORE" -DPERL_EXT
Util.c<br>
> Running Mkbootstrap for List::Util ()<br>
> chmod 644 Util.bs<br>
> rm -f blib/arch/auto/List/Util/Util.so<br>
> ld -bM:SRE -lc_r -bhalt:4 -bexpall -G -bnoentry -lpthreads -lc
Util.o -o <br>
> blib/arch/auto/List/Util/Util.so \<br>
> \<br>
> <br>
> chmod 755 blib/arch/auto/List/Util/Util.so<br>
> cp Util.bs blib/arch/auto/List/Util/Util.bs<br>
> chmod 644 blib/arch/auto/List/Util/Util.bs<br>
> Manifying blib/man3/List::Util.3<br>
> Manifying blib/man3/Scalar::Util.3<br>
> [root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] >
make <br>
> test<br>
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM"
"-e" <br>
> "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t<br>
> t/00version.....ok<br>
> t/blessed.......ok<br>
> t/dualvar.......skipped<br>
> all skipped: dualvar requires XS version<br>
> t/first.........ok<br>
> 2/17 skipped: Poor man's MULTICALL can't
cope<br>
> t/isvstring.....skipped<br>
> all skipped: isvstring requires XS version<br>
> t/lln...........ok<br>
> t/max...........ok<br>
> t/maxstr........ok<br>
> t/min...........ok<br>
> t/minstr........ok<br>
> t/openhan.......ok<br>
> t/p_blessed.....ok<br>
> t/p_first.......ok<br>
> t/p_lln.........ok<br>
> t/p_max.........ok<br>
> t/p_maxstr......ok<br>
> t/p_min.........ok<br>
> t/p_minstr......ok<br>
> t/p_openhan.....ok<br>
> t/p_readonly....ok<br>
> t/p_reduce......ok<br>
> t/p_refaddr.....ok<br>
> t/p_reftype.....ok<br>
> t/p_shuffle.....ok<br>
> t/p_sum.........ok<br>
> t/p_tainted.....ok<br>
> t/proto.........skipped<br>
> all skipped: set_prototype requires XS
version<br>
> t/readonly......ok<br>
> t/reduce........ok<br>
> 2/23 skipped: Poor man's MULTICALL can't
cope<br>
> t/refaddr.......ok<br>
> t/reftype.......ok<br>
> t/shuffle.......ok<br>
> t/sum...........ok<br>
> t/tainted.......ok<br>
> t/weak..........skipped<br>
> all skipped: weaken requires XS version<br>
> All tests successful, 4 tests and 4 subtests skipped.<br>
> Files=35, Tests=327, 5 wallclock secs ( 2.62 cusr + 2.13
csys = 4.75 <br>
> CPU)<br>
> <br>
> <br>
> As you can see, Weak complains about needing the XS version...What's
an XS <br>
> version? in the hopes of shotguning a fix I updated ExtUtils::MakeMaker,
<br>
> ExtUtils::Cbuilder, XSLoader, Params::Validate...All to no avail.
<br>
> <br>
> Any ideas?<br>
> <br>
> Jonathan Kaufman<br>
> <br>
> Foot Locker Corporate Services, Inc.<br>
> <br>
> <br>
> <br>
> Visit us on-line at footlocker.com. <br>
> <br>
> The information in this e-mail, and any attachment therein, is <br>
> confidential and for use by the addressee only. If you are not the
<br>
> intended recipient, please return the e-mail to the sender and delete
it <br>
> from your computer. Although the Company attempts to sweep e-mail
and <br>
> attachments for viruses, it does not guarantee that either are virus-free
<br>
> and accepts no liability for any damage sustained as a result of viruses.<br>
> <br>
> <br>
> ------------------------------------------------------------------------<br>
> <br>
> _______________________________________________<br>
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users<br>
> <br>
> Be sure to check out the RT Wiki at http://wiki.bestpractical.com<br>
> <br>
> Download a free sample chapter of RT Essentials from O'Reilly Media
at http://rtbook.bestpractical.com<br>
> <br>
> WE'RE COMING TO YOUR TOWN SOON - RT Training in Amsterdam, Boston
and<br>
> San Francisco - Find out more at http://bestpractical.com/services/training.html<br>
<br>
-- <br>
____________________<br>
Chris Hall<br>
FilmLight Ltd<br>
14-15 Manette St<br>
London W1D 4AP<br>
+44 (0)20 7292 0400<br>
_______________________________________________<br>
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users<br>
<br>
Be sure to check out the RT Wiki at http://wiki.bestpractical.com<br>
<br>
Download a free sample chapter of RT Essentials from O'Reilly Media at
http://rtbook.bestpractical.com<br>
<br>
WE'RE COMING TO YOUR TOWN SOON - RT Training in Amsterdam, Boston and<br>
San Francisco - Find out more at http://bestpractical.com/services/training.html<br>
</tt></font>
<br>