[rt-users] mod_perl, mod_auth_pam problems.
Reggie Nalder
escualawork at yahoo.com
Fri Mar 12 17:28:20 EST 2004
Hello,
I am attempting to build Apache with mod_auth_pam, and
have been unable to
figure out a method that will work. I am using the
method of compiling
mod_perl in Apache that is described in the RT3 manual
appendix, and have
added the APACI_ARGS line (see below) to add
mod_auth_pam. The Makefile.PL
command completes semmingly ok, but when I try to run
make, I get results
that include the following error:
modules/standard/libstandard.a(mod_auth_pam.o): In
function
`pam_auth_basic_user':
mod_auth_pam.o(.text+0x30f): undefined reference to
`pam_start'
mod_auth_pam.o(.text+0x33e): undefined reference to
`pam_strerror'
mod_auth_pam.o(.text+0x36e): undefined reference to
`pam_fail_delay'
mod_auth_pam.o(.text+0x37f): undefined reference to
`pam_authenticate'
mod_auth_pam.o(.text+0x3b2): undefined reference to
`pam_strerror'
mod_auth_pam.o(.text+0x3dd): undefined reference to
`pam_end'
mod_auth_pam.o(.text+0x3fa): undefined reference to
`pam_end'
mod_auth_pam.o(.text+0x421): undefined reference to
`pam_acct_mgmt'
mod_auth_pam.o(.text+0x450): undefined reference to
`pam_strerror'
mod_auth_pam.o(.text+0x46c): undefined reference to
`pam_end'
mod_auth_pam.o(.text+0x48a): undefined reference to
`pam_end'
collect2: ld returned 1 exit status
make[3]: *** [target_static] Error 1
make[3]: Leaving directory
`/tmp/apache/apache_1.3.29/src'
make[2]: *** [build-std] Error 2
make[2]: Leaving directory
`/tmp/apache/apache_1.3.29'
make[1]: *** [build] Error 2
make[1]: Leaving directory
`/tmp/apache/apache_1.3.29'
make: *** [apaci_httpd] Error 2
###############################################
I have done some web searching that says it is
necessary to install pam_devel. I have
installed it, and get the same error.
I would be very grateful for any help.
Using: perl-5.6.0-108
Linux-PAM-0.74
Apache 1.3.29
mod_perl-1.27
pam-devel-0.74-51
mod_auth_pam-1.1.1
SuSE Linux Ent.Srver 7
kernel 2.4.7-64GB-SMP
Here is the mod_perl Makefile command:
##################################################################
From Makefile.PL in the mod_perl directory:
$APACI_ARGS =
"--activate-module=src/modules/standard/mod_auth_pam.o";
################################################################
perl Makefile.PL
APACHE_SRC=/tmp/apache/apache_1.3.29/src USE_APACI=1
DO_HTTPD=1 EVERYTHING=1
This command appears to run ok.
Will configure via APACI
cp apaci/Makefile.libdir
/tmp/apache/apache_1.3.29/src/modules/perl/Makefile.libdir
cp apaci/Makefile.tmpl
/tmp/apache/apache_1.3.29/src/modules/perl/Makefile.tmpl
cp apaci/README
/tmp/apache/apache_1.3.29/src/modules/perl/README
cp apaci/configure
/tmp/apache/apache_1.3.29/src/modules/perl/configure
cp apaci/libperl.module
/tmp/apache/apache_1.3.29/src/modules/perl/libperl.module
cp apaci/mod_perl.config.sh
/tmp/apache/apache_1.3.29/src/modules/perl/mod_perl.config.sh
cp apaci/load_modules.pl
/tmp/apache/apache_1.3.29/src/modules/perl/load_modules.pl
cp apaci/find_source
/tmp/apache/apache_1.3.29/src/modules/perl/find_source
cp apaci/apxs_cflags
/tmp/apache/apache_1.3.29/src/modules/perl/apxs_cflags
cp apaci/perl_config
/tmp/apache/apache_1.3.29/src/modules/perl/perl_config
cp apaci/mod_perl.exp
/tmp/apache/apache_1.3.29/src/modules/perl/mod_perl.exp
PerlDispatchHandler.........enabled
PerlChildInitHandler........enabled
PerlChildExitHandler........enabled
PerlPostReadRequestHandler..enabled
PerlTransHandler............enabled
PerlHeaderParserHandler.....enabled
PerlAccessHandler...........enabled
PerlAuthenHandler...........enabled
PerlAuthzHandler............enabled
PerlTypeHandler.............enabled
PerlFixupHandler............enabled
PerlHandler.................enabled
PerlLogHandler..............enabled
PerlInitHandler.............enabled
PerlCleanupHandler..........enabled
PerlRestartHandler..........enabled
PerlStackedHandlers.........enabled
PerlMethodHandlers..........enabled
PerlDirectiveHandlers.......enabled
PerlTableApi................enabled
PerlLogApi..................enabled
PerlUriApi..................enabled
PerlUtilApi.................enabled
PerlFileApi.................enabled
PerlConnectionApi...........enabled
PerlServerApi...............enabled
PerlSections................enabled
PerlSSI.....................enabled
Will run tests as User: 'nobody' Group: 'root'
(cd /tmp/apache/apache_1.3.29 && CC="cc" CFLAGS="
-fno-strict-aliasing
-I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64" ./configure
--activate-module=src/modules/perl/libperl.a
--disable-rule=EXPAT
--activate-module=src/modules/standard/mod_auth_pam.o)
Configuring for Apache, Version 1.3.29
+ using installation path layout: Apache
(config.layout)
+ activated perl module (modules/perl/libperl.a)
+ activated auth_pam module
(modules/standard/mod_auth_pam.o)
Creating Makefile
Creating Configuration.apaci in src
+ id: mod_perl/1.27
+ id: Perl/v5.8.3 (linux) [/usr/local/bin/perl]
Creating Makefile in src
+ configured for Linux platform
+ setting C pre-processor to cc -E
+ using "tr [a-z] [A-Z]" to uppercase
+ checking for system header files
+ adding selected modules
o perl_module uses ConfigStart/End
+ mod_perl build type: OBJ
+ setting up mod_perl build environment
+ adjusting Apache build environment
+ enabling Perl support for SSI (mod_include)
+ checking sizeof various data types
+ doing sanity check on compiler and options
Creating Makefile in src/support
Creating Makefile in src/regex
Creating Makefile in src/os/unix
Creating Makefile in src/ap
Creating Makefile in src/main
Creating Makefile in src/modules/standard
Creating Makefile in src/modules/perl
Checking CGI.pm VERSION..........ok
Checking for LWP::UserAgent......ok
Checking for HTML::HeadParser....ok
Writing Makefile for Apache
Writing Makefile for Apache::Connection
Writing Makefile for Apache::Constants
Writing Makefile for Apache::File
Writing Makefile for Apache::Leak
Writing Makefile for Apache::Log
Writing Makefile for Apache::ModuleConfig
Writing Makefile for Apache::PerlRunXS
Writing Makefile for Apache::Server
Writing Makefile for Apache::Symbol
Writing Makefile for Apache::Table
Writing Makefile for Apache::URI
Writing Makefile for Apache::Util
Writing Makefile for mod_perl
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com
More information about the rt-users
mailing list