[rt-users] Still having email attatchment corruption after Perlupgrade

[Ruslan U. Zakirov]

put attached file into
/path/to/your/rt/share/html

and then in browser goto into http://www.your-rt.com/test.html

and past output here.

Brelsfoard, Alex wrote:
> My original message is below. I was asked whether we were using FastCGI or
> Mod_Perl.  We are using mod_perl.  After talking with my administrator about
> this he rebuil;t mod_perl.  But the problem still persists.  What other
> information do you need?  Any other suggestions?
> Thanks a lot.
> 
> --Alex Brelsfoard
> 
> 
> -----Original Message-----
> From: rt-users-bounces at lists.bestpractical.com on behalf of Brelsfoard, Alex
> Sent: Wed 9/29/2004 2:47 PM
> To: rt-users at lists.bestpractical.com
> Subject: [rt-users] Still having email attatchment corruption after
> Perlupgrade
>  
> OK, so we were having problems with some (randomly) attachments being sent in
> or manually uploaded into RT.  It was the whole "RT added extra bytes to the
> file" problem.  So I reasearched the problem and found that we were using
> Perl 5.8.0.  Sounds like an obvious problem.  So we upgraded to 5.8.5.
> Everything seemed ti go smoothly for ~2 days.  And then it all started
> happening again.  I have verified that Perl 5.8.5 is indeed still installed
> and active.  We are on RT version 3.0.8 on RH Linux.
>  
> Any suggestions/idas?
>  
> Thanks.
>  
> --Alex
>  
> 
> Alex Brelsfoard 
> Web Applications Developer 
> Web Development Office 
> Worcester Polytechnic Institute 
> 508-831-6147 
> alexb at wpi.edu 
> 
>  
> 
> 
> _______________________________________________
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
> Be sure to check out the RT wiki at http://wiki.bestpractical.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20041007/aa343cb2/attachment.html>