[rt-users] Emails sent to verizon.net addresses bouncing

Joby Walker joby at u.washington.edu
Mon May 2 17:57:16 EDT 2005


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You could also just configure the SMTP server on your RT box to use your
main relay for outgoing mail.

Joby Walker
ITI SSG, University of Washington
- --
PGP key: https://staff.washington.edu/joby/joby-u-pub.asc


Jonathan Reeder wrote:
> Ah, perfect then, that is my answer.  My RT system only allows inbound
> SMTP connections from our main relay, so that is the problem.  I'll open
> up 25 to the world and that should solve it.
>  
> Thanks a bunch, Andy.
> 
>     -----Original Message-----
>     *From:* erin.smith at verizon.com [mailto:erin.smith at verizon.com]
>     *Sent:* Monday, May 02, 2005 4:23 PM
>     *To:* Jonathan Reeder
>     *Subject:* RE: [rt-users] Emails sent to verizon.net addresses bouncing
> 
> 
>     What email address are you sending too and I can take a look?  Just
>     as an FYI the SV servers do a sender verify against the sending smtp
>     server (sending server has to accept an inbound email connection as
>     verification before accepting) and if that fails you will not be
>     able to send mail to verizon.
>     ----------------------------------------------------
>     Andy Smith
>     Verizon Internet Services Operations
>     Security and Legal Compliance
>     Erin.Smith at vol.verizon.com
> 
> 
>     *"Jonathan Reeder" <jreeder at minutemenu.com>*
>     Sent by: rt-users-bounces at lists.bestpractical.com
> 
>     05/02/2005 04:08 PM
> 
>     	
>     To
>     	"Patrick Morris" <pmorris at hermesinfotech.com>
>     cc 	rt-users at lists.bestpractical.com
>     	
>     	
>     Subject 	RE: [rt-users] Emails sent to verizon.net addresses bouncing
> 
> 
>     	
> 
> 
> 
> 
> 
>        ----- Transcript of session follows -----
>     ... while talking to relay.verizon.net.:
>     >>> MAIL From:<www at support.xxxxxx.com> SIZE=2033
>     <<< 450 Requested mail action not taken-Try later:sv16pub.verizon.net
>     <xxxxx at verizon.net>... Deferred: 450 Requested mail action not taken-Try
>     later:sv16pub.verizon.net
> 
>     The "try again later" seems like crap though, because I can try all
>     I want
>     to no avail.
> 
>     I just tested sending an email manually and didn't have a problem.
>      So it
>     would seem that the problem lies somewhere in my configuration.
> 
>     -----Original Message-----
>     From: Patrick Morris [mailto:pmorris at hermesinfotech.com]
>     Sent: Monday, May 02, 2005 4:05 PM
>     To: Jonathan Reeder
>     Cc: rt-users at lists.bestpractical.com
>     Subject: Re: [rt-users] Emails sent to verizon.net addresses bouncing
> 
> 
>     Any 400-series error is generally temporary.  Is there anything else to
>     the error, or just the one line?  Can you manually send mail to the same
>     Verizon addresses?
> 
>     Jonathan Reeder wrote:
> 
>     > Every time my RT generates an email to a verizon.net email address, I
>     > get the following bounce code:
>     >
>     > 450 Requested mail action not taken
>     >
>     > This _only_ happens with Verizon, no other domains have any trouble
>     > with my RT emails whatsoever.
>     >
>     > Has anyone else experienced this type of issue with Verizon?  Anyone
>     > have any ideas as to what might cause it?  I'm perfectly willing to
>     > explore the thought that I have something misconfigured, but it just
>     > seems weird that I only have problems with Verizon addresses.
>     >
>     >------------------------------------------------------------------------
>     >
>     >_______________________________________________
>     >http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
>     >
>     >Be sure to check out the RT Wiki at http://wiki.bestpractical.com
>     >
> 
> 
> 
> 
>     _______________________________________________
>     http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
>     Be sure to check out the RT Wiki at http://wiki.bestpractical.com
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
> Be sure to check out the RT Wiki at http://wiki.bestpractical.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCdqI8gA0gpghkf88RAmgsAKDoAey8vmya4eQ60qE//sQ5R/4hggCgqxFg
aeFTMAYHtGmWbFLZqCslKY0=
=5L9K
-----END PGP SIGNATURE-----



More information about the rt-users mailing list