[rt-users] Install issues

Fri Sep 2 10:05:02 EDT 2005

On 9/2/05, Robert Geller <rgeller at lnrproperty.com> wrote:
> 
> >This string mean that you have mod_perl as DSO and that's why you have
> seg faults. You need static build. I think you've made something wrong.
> 
> Currently, I am not having any seg fault issues.  I am only having the
> "Almost There" issue.
You've got this because of your server config. You have to enable
mod_perl for RT. Your config should look like:

PerlModule Apache::DBI
<VirtualHost>
       ServerAdmin root at localhost
       DocumentRoot /opt/rt3/share/html
       AddDefaultCharset UTF-8

       PerlRequire /opt/rt3/bin/webmux.pl

       <Location />
              SetHandler perl-script
              PerlHandler RT::Mason
       </Location>
</VirtualHost>


> As far as mod_perl as DSO, not sure why that happened following the
> intructions on the Wiki.
> Would having mod_perl as a DSO cause that issue as well?
No, mod_perl as DSO only leads to seg faults.

> 
> -Rob
> >
> > Apache/1.3.33 (Unix) PHP/4.4.0 mod_perl/1.29 configured -- resuming
> > normal operations
> >
> > -Rob
> >
> >
> > -----Original Message-----
> > From: Ruslan Zakirov [mailto:ruslan.zakirov at gmail.com]
> > Sent: Thursday, September 01, 2005 6:31 PM
> > To: Robert Geller
> > Cc: RT-Users
> > Subject: Re: [rt-users] Install issues
> >
> > Please, always Cc to rt-lists!
> >
> >
> > On 9/2/05, Robert Geller <rgeller at lnrproperty.com> wrote:
> > > I did it just like the WIKI says under your variation.  Not sure if
> > > that's static or DSO.
> > Check that in apache error log shows line about mod_perl when server
> > start up.
> > And send output of the `httpd -l`.
> >
> >
> > > I am actually able to pull up http://my.site/rt3 now, however Im
> > > getting the generic :
> > >
> > > You're almost there!
> > > You haven't yet configured your webserver to run RT. You appear to
> > > have installed RT's web interface correctly, but haven't yet
> > > configured your web server to "run" the RT server which powers the
> > > web
> >
> > > interface. The next step is to edit your webserver's configuration
> > > file to instruct it to use RT's mod_perl, fastcgi or speedycgi
> > > handler. If you need commercial support, please contact us at
> > sales at bestpractical.com.
> > Please, show RT part of your httpd.conf.
> >
> > >
> > >
> > > -Robert
> > >
> > > -----Original Message-----
> > > From: Ruslan Zakirov [mailto:ruslan.zakirov at gmail.com]
> > > Sent: Thursday, September 01, 2005 5:02 PM
> > > To: Robert Geller
> > > Cc: RT-Users
> > > Subject: Re: [rt-users] Install issues
> > >
> > > How did you build mod_perl? As DSO? Or is it static build?
> > >
> > > If you built as DSO then this could be a reason.
> > >
> > > On 9/1/05, Robert Geller <rgeller at lnrproperty.com> wrote:
> > > > Well, I re-did everything, and I think I got modperl installed
> > > > properly, however I get Segmentation faults when hitting
> > > > http://my.site/rt3
> > > >
> > > > Thu Sep  1 15:46:15 2005] [notice] Apache/1.3.33 (Unix) PHP/4.4.0
> > > > mod_perl/1.29 configured -- resuming normal operations
> > > >
> > > > [Thu Sep  1 15:46:40 2005] [notice] child pid 10752 exit signal
> > > > Segmentation fault (11) [Thu Sep  1 15:46:40 2005] [notice] child
> > > > pid
> > > > 10753 exit signal Segmentation fault (11)
> > > >
> > > >
> > > > Also, none of the FastCGI directives are working in the config,
> > > > which I don't believe I should be using anyway since Im using
> > mod_perl.
> > > >
> > > > *sigh*
> > > >
> > > > Thanks in advance,
> > > >
> > > > -Robert Geller
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Ruslan Zakirov [mailto:ruslan.zakirov at gmail.com]
> > > > Sent: Thursday, September 01, 2005 3:14 PM
> > > > To: Robert Geller
> > > > Cc: rt-users at lists.bestpractical.com
> > > > Subject: Re: [rt-users] Install issues
> > > >
> > > > Please, recheck your apache, because this options it gets from
> > > > mod_perl and this errors mean that you haven't installed properly
> > > mod_perl.
> > > >
> > > > If you try to use MP as DSO modules then may be you forgive to
> > > > LoadModule.
> > > >
> > > > As I understand FC3 distributed with Apache2+MP2 rpms so you build
> > > > A1+MP1 from scratch. You can try step by step instructions
> > > > http://wiki.bestpractical.com/?ManualApache, I hope this will help
> 
> > > > you
> > >
> > > > build stable MP1 installation.
> > > >
> > > > On 9/1/05, Robert Geller <rgeller at lnrproperty.com> wrote:
> > > > >
> > > > >
> > > > > I installed rt on an FC3 host using apache 1.3.33 and mod_perl
> > 1.29.
> > > > > Everything went somewhat smooth, however my apache config is not
> 
> > > > > being
> > > >
> > > > > accepted.
> > > > >
> > > > > Im am getting the following errors:
> > > > >
> > > > > Invalid command 'PerlModule'
> > > > > Invalid command 'PerlRequire'
> > > > > Invalid command 'PerlHandler'
> > > > >
> > > > > Not sure what is going on...
> > > > >
> > > > > Any ideas?
> > > > >
> > > > > Thanks
> > > > >
> > > > > -Rob
> > > > >
> > > > >
> > > > > <VirtualHost>
> > > > >         ServerAdmin root at localhost
> > > > >         DocumentRoot /opt/rt3/share/html
> > > > >         AddDefaultCharset UTF-8
> > > > >         PerlModule Apache::DBI
> > > > >         PerlRequire /opt/rt3/bin/webmux.pl
> > > > >
> > > > >         <Location />
> > > > >         SetHandler perl-script
> > > > >         PerlHandler RT::Mason
> > > > >         </Location>
> > > > >
> > > > >         #Alias /NoAuth/images/
> > > > > /www/rt3/share/html/NoAuth/images/
> > > > >
> > > > >         #FastCgiIpcDir /tmp
> > > > >         #FastCgiServer /www/rt3/bin/mason_handler.fcgi
> > > > > -idle-timeout
> > >
> > > > > 120
> > > > >
> > > > >         #AddHandler fastcgi-script fcgi
> > > > >         #ScriptAlias / /www/rt3/bin/mason_handler.fcgi/
> > > > >
> > > > > </VirtualHost>
> > > > > _______________________________________________
> > > > > http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> > > > >
> > > > > Be sure to check out the RT Wiki at
> > > > > http://wiki.bestpractical.com
> > > > >
> > > > > Buy your copy of our new book, RT Essentials, today!
> > > > >
> > > > > Download a free sample chapter from
> > > > > http://rtbook.bestpractical.com
> > > > >
> > > >
> > > >
> > > > --
> > > > Best regards, Ruslan.
> > > >
> > >
> > >
> > > --
> > > Best regards, Ruslan.
> > >
> >
> >
> > --
> > Best regards, Ruslan.
> >
> 
> 
> --
> Best regards, Ruslan.
> 


-- 
Best regards, Ruslan.