[rt-users] Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing
Jesse Vincent
jesse at bestpractical.com
Tue Sep 22 16:52:48 EDT 2009
On Tue, Sep 22, 2009 at 01:50:27PM -0700, Behzad Mahini wrote:
> Here are the results of the manual install associated to "prove -lv t/
> anythiing_that_fails" for all of the failing tests ('perl
> Makefile.PL' & 'make test' steps resulted in the same output as I had
> already reported in my earlier email):
>
Try out http://search.cpan.org/~jesse/GnuPG-Interface-0.40_04/ instead
of 0.36 and tell us how it does.
>
> ====
> $ sudo prove -lv t/encrypt.t
> t/encrypt.t ..
> 1..3
> Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
> 160.
> at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
> Interface.pm line 22
> Can't locate auto/GnuPG/Interface/encrypt.al in @INC (@INC contains: ./
> t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /Library/Perl/
> Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/Updates/5.8.8 /
> System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/
> Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/
> Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-
> multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/
> Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/
> Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1 .) at t/
> encrypt.t line 21
> Dubious, test returned 2 (wstat 512, 0x200)
> Failed 3/3 subtests
>
> Test Summary Report
> -------------------
> t/encrypt.t (Wstat: 512 Tests: 0 Failed: 0)
> Non-zero exit status: 2
> Parse errors: Bad plan. You planned 3 tests but ran 0.
> Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
> 0.00 csys = 0.07 CPU)
> Result: FAIL
> ====
>
>
> ====
> $ sudo prove -lv t/get_public_keys.t
> t/get_public_keys.t ..
> 1..3
> Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
> 160.
> at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
> Interface.pm line 22
> Can't locate auto/GnuPG/Interface/get_public_.al in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at t/get_public_keys.t line 22
> Dubious, test returned 2 (wstat 512, 0x200)
> Failed 3/3 subtests
>
> Test Summary Report
> -------------------
> t/get_public_keys.t (Wstat: 512 Tests: 0 Failed: 0)
> Non-zero exit status: 2
> Parse errors: Bad plan. You planned 3 tests but ran 0.
> Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
> 0.01 csys = 0.08 CPU)
> Result: FAIL
> ====
>
>
> ====
> $ sudo prove -lv t/get_secret_keys.t
> t/get_secret_keys.t ..
> 1..2
> Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
> 160.
> at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
> Interface.pm line 22
> Can't locate auto/GnuPG/Interface/get_secret_.al in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at t/get_secret_keys.t line 21
> Dubious, test returned 2 (wstat 512, 0x200)
> Failed 2/2 subtests
>
> Test Summary Report
> -------------------
> t/get_secret_keys.t (Wstat: 512 Tests: 0 Failed: 0)
> Non-zero exit status: 2
> Parse errors: Bad plan. You planned 2 tests but ran 0.
> Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
> 0.00 csys = 0.07 CPU)
> Result: FAIL
> ====
>
>
> ====
> $ sudo prove -lv t/passphrase_handling.t
> t/passphrase_handling.t ..
> 1..3
> Can't locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
> 160.
> at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
> Interface.pm line 22
> Can't locate auto/GnuPG/Interface/test_defaul.al in @INC (@INC
> contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
> Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
> Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
> System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
> multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
> 5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
> Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
> multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
> Library/Perl/5.8.1 .) at t/passphrase_handling.t line 18
> Dubious, test returned 2 (wstat 512, 0x200)
> Failed 3/3 subtests
>
> Test Summary Report
> -------------------
> t/passphrase_handling.t (Wstat: 512 Tests: 0 Failed: 0)
> Non-zero exit status: 2
> Parse errors: Bad plan. You planned 3 tests but ran 0.
> Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr
> 0.00 csys = 0.06 CPU)
> Result: FAIL
> ====
>
>
> -Behzad
>
> On Sep 22, 2009, at 12:19 PM, Kevin Falcone wrote:
>
> > On Tue, Sep 22, 2009 at 11:06:57AM -0700, Behzad Mahini wrote:
> >> I can't finalize my RTIR installation, as I can't do a successful
> >> installation of the last of the RTIR prerequisites due to a bunch of
> >> the tests failing for CPAN module GnuPG::Interface. Before posting, I
> >> did consult all the RTIR documentations, and GnuPG website, and CPAN,
> >> etc., and could not find anything addressing the failing test
> >> results...I also note that CPAN's site claims a 68% success rate
> >> (Perl
> >> 5.8.8) for tests associated to GnuPG::Interface module. Details are
> >> listed below.
> >
> > Diagnosing your failure is difficult without more information about
> > why it is failing.
> >
> > Download the module and do the install manually,
> > perl Makefile.PL
> > make test
> > prove -lv t/anything_that_fails
> >
> > -kevin
> >
> >>
> >> My Setup:
> >> =======
> >> RT 3.8.4
> >> RTFM -2.4.2
> >> Mac OS X 10.5.8
> >> MySQL 5.1.37
> >> Apache/2.2.13 (Unix) mod_perl/2.0.4 Perl/v5.8.8 configured
> >>
> >>
> >> My Installed Prerequisites (for RTIR):
> >> ==========================
> >> GnuPG 2.0.13 ............(I am planning to use S/MIME, and Gnu's site
> >> recommended version 2.x as opposed to 1.x of GnuPG)
> >>
> >>
> >> Concerns:
> >> ===========
> >> As I am about to use RTIR for secure purposes, the obvious concern of
> >> mine in the event I do a CPAN '"force install GnuPG::Interface", is
> >> to
> >> get blind-sided with things that I should have not overlooked as a
> >> result of the failing tests.
> >>
> >>
> >> Misc.
> >> =====
> >> I also attempted to do a CPAN installation of module GnuPG (different
> >> than module GnuPG::Interface)...and of its 25 tests, every single one
> >> failed. For now I am assuming that I don't need to worry about this
> >> module as a pre-requisite for a successful installation of RTIR (as
> >> GnuPG::Interface should suffice).
> >>
> >>
> >> Here are the output of my (failing) installation of CPAN module
> >> GnuPG::Interface:
> >> ===============================================================
> >>
> >> cpan[3]> install GnuPG::Interface
> >> Running install for module 'GnuPG::Interface'
> >> Running make for J/JE/JESSE/GnuPG-Interface-0.36.tar.gz
> >> CPAN: Digest::SHA loaded ok (v5.47)
> >> CPAN: Compress::Zlib loaded ok (v2.02)
> >> Checksum for /usr/local/.cpan/sources/authors/id/J/JE/JESSE/GnuPG-
> >> Interface-0.36.tar.gz ok
> >> Scanning cache /usr/local/.cpan/build for sizes
> >> ............................................................................DONE
> >> CPAN: Archive::Tar loaded ok (v1.52)
> >> GnuPG-Interface-0.36/
> >> GnuPG-Interface-0.36/ChangeLog
> >> GnuPG-Interface-0.36/COPYING
> >> GnuPG-Interface-0.36/lib/
> >> GnuPG-Interface-0.36/lib/GnuPG/
> >> GnuPG-Interface-0.36/lib/GnuPG/Fingerprint.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/Handles.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/Interface.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/Key.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/Options.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/PrimaryKey.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/PublicKey.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/SecretKey.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/Signature.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/SubKey.pm
> >> GnuPG-Interface-0.36/lib/GnuPG/UserId.pm
> >> GnuPG-Interface-0.36/Makefile.PL
> >> GnuPG-Interface-0.36/MANIFEST
> >> GnuPG-Interface-0.36/META.yml
> >> GnuPG-Interface-0.36/NEWS
> >> GnuPG-Interface-0.36/README
> >> GnuPG-Interface-0.36/SIGNATURE
> >> GnuPG-Interface-0.36/t/
> >> GnuPG-Interface-0.36/t/clearsign.t
> >> GnuPG-Interface-0.36/t/decrypt.t
> >> GnuPG-Interface-0.36/t/detach_sign.t
> >> GnuPG-Interface-0.36/t/encrypt.t
> >> GnuPG-Interface-0.36/t/encrypt_symmetrically.t
> >> GnuPG-Interface-0.36/t/export_keys.t
> >> GnuPG-Interface-0.36/t/Fingerprint.t
> >> GnuPG-Interface-0.36/t/get_public_keys.t
> >> GnuPG-Interface-0.36/t/get_secret_keys.t
> >> GnuPG-Interface-0.36/t/GnuPG/
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableFingerprint.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableKey.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparablePrimaryKey.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparablePublicKey.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableSecretKey.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableSignature.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableSubKey.pm
> >> GnuPG-Interface-0.36/t/GnuPG/ComparableUserId.pm
> >> GnuPG-Interface-0.36/t/import_keys.t
> >> GnuPG-Interface-0.36/t/Interface.t
> >> GnuPG-Interface-0.36/t/list_public_keys.t
> >> GnuPG-Interface-0.36/t/list_secret_keys.t
> >> GnuPG-Interface-0.36/t/list_sigs.t
> >> GnuPG-Interface-0.36/t/MyTest.pm
> >> GnuPG-Interface-0.36/t/MyTestSpecific.pm
> >> GnuPG-Interface-0.36/t/passphrase_handling.t
> >> GnuPG-Interface-0.36/t/sign.t
> >> GnuPG-Interface-0.36/t/sign_and_encrypt.t
> >> GnuPG-Interface-0.36/t/UserId.t
> >> GnuPG-Interface-0.36/t/verify.t
> >> GnuPG-Interface-0.36/t/wrap_call.t
> >> GnuPG-Interface-0.36/test/
> >> GnuPG-Interface-0.36/test/encrypted.1.gpg
> >> GnuPG-Interface-0.36/test/key.1.asc
> >> GnuPG-Interface-0.36/test/options
> >> GnuPG-Interface-0.36/test/passphrase
> >> GnuPG-Interface-0.36/test/plain.1.txt
> >> GnuPG-Interface-0.36/test/public-keys/
> >> GnuPG-Interface-0.36/test/public-keys/1.0.test
> >> GnuPG-Interface-0.36/test/public-keys/1.1.test
> >> GnuPG-Interface-0.36/test/public-keys/2.0.test
> >> GnuPG-Interface-0.36/test/public-keys/2.1.test
> >> GnuPG-Interface-0.36/test/public-keys-sigs/
> >> GnuPG-Interface-0.36/test/public-keys-sigs/1.0.test
> >> GnuPG-Interface-0.36/test/public-keys-sigs/1.1.test
> >> GnuPG-Interface-0.36/test/public-keys-sigs/2.0.test
> >> GnuPG-Interface-0.36/test/public-keys-sigs/2.1.test
> >> GnuPG-Interface-0.36/test/pubring.gpg
> >> GnuPG-Interface-0.36/test/secret-keys/
> >> GnuPG-Interface-0.36/test/secret-keys/1.0.test
> >> GnuPG-Interface-0.36/test/secret-keys/2.0.test
> >> GnuPG-Interface-0.36/test/secring.gpg
> >> GnuPG-Interface-0.36/test/signed.1.asc
> >> GnuPG-Interface-0.36/THANKS
> >> CPAN: File::Temp loaded ok (v0.22)
> >> CPAN: YAML loaded ok (v0.70)
> >>
> >> CPAN.pm: Going to build J/JE/JESSE/GnuPG-Interface-0.36.tar.gz
> >>
> >> which gpg ... /usr/local/bin/gpg
> >> Checking if your kit is complete...
> >> Looks good
> >> Writing Makefile for GnuPG::Interface
> >> cp lib/GnuPG/Signature.pm blib/lib/GnuPG/Signature.pm
> >> cp lib/GnuPG/Interface.pm blib/lib/GnuPG/Interface.pm
> >> AutoSplitting blib/lib/GnuPG/Interface.pm (blib/lib/auto/GnuPG/
> >> Interface)
> >> blib/lib/GnuPG/Interface.pm: some names are not unique when truncated
> >> to 8 characters:
> >> directory blib/lib/auto/GnuPG/Interface:
> >> get_public_keys.al, get_public_keys_with_sigs.al truncate to
> >> get_publ
> >> cp lib/GnuPG/SubKey.pm blib/lib/GnuPG/SubKey.pm
> >> cp lib/GnuPG/PrimaryKey.pm blib/lib/GnuPG/PrimaryKey.pm
> >> cp lib/GnuPG/Handles.pm blib/lib/GnuPG/Handles.pm
> >> cp lib/GnuPG/SecretKey.pm blib/lib/GnuPG/SecretKey.pm
> >> cp lib/GnuPG/Key.pm blib/lib/GnuPG/Key.pm
> >> cp lib/GnuPG/UserId.pm blib/lib/GnuPG/UserId.pm
> >> cp lib/GnuPG/Fingerprint.pm blib/lib/GnuPG/Fingerprint.pm
> >> cp lib/GnuPG/Options.pm blib/lib/GnuPG/Options.pm
> >> cp lib/GnuPG/PublicKey.pm blib/lib/GnuPG/PublicKey.pm
> >> Manifying blib/man3/GnuPG::Signature.3pm
> >> Manifying blib/man3/GnuPG::Interface.3pm
> >> Manifying blib/man3/GnuPG::PrimaryKey.3pm
> >> Manifying blib/man3/GnuPG::SubKey.3pm
> >> Manifying blib/man3/GnuPG::Handles.3pm
> >> Manifying blib/man3/GnuPG::Key.3pm
> >> Manifying blib/man3/GnuPG::SecretKey.3pm
> >> Manifying blib/man3/GnuPG::Fingerprint.3pm
> >> Manifying blib/man3/GnuPG::UserId.3pm
> >> Manifying blib/man3/GnuPG::PublicKey.3pm
> >> Manifying blib/man3/GnuPG::Options.3pm
> >> JESSE/GnuPG-Interface-0.36.tar.gz
> >> /usr/bin/make -- OK
> >> Running make test
> >> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
> >> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
> >> t/clearsign.t .............. ok
> >> t/decrypt.t ................ ok
> >> t/detach_sign.t ............ ok
> >> t/encrypt.t ................ 1/3 gpg: WARNING: unsafe permissions on
> >> homedir `test'
> >> t/encrypt.t ................ ok
> >> t/encrypt_symmetrically.t .. ok
> >> t/export_keys.t ............ ok
> >> t/Fingerprint.t ............ ok
> >> t/get_public_keys.t ........ gpg: WARNING: unsafe permissions on
> >> homedir `test'
> >> t/get_public_keys.t ........ 1/3 subkeys fail comparison; this is a
> >> known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92.
> >> t/get_public_keys.t ........ Failed 3/3 subtests
> >> t/get_secret_keys.t ........ gpg: WARNING: unsafe permissions on
> >> homedir `test'
> >> t/get_secret_keys.t ........ Failed 2/2 subtests
> >> t/import_keys.t ............ ok
> >> t/Interface.t .............. ok
> >> t/list_public_keys.t ....... ok
> >> t/list_secret_keys.t ....... ok
> >> t/list_sigs.t .............. ok
> >> t/passphrase_handling.t .... 1/3 gpg: WARNING: unsafe permissions on
> >> homedir `test'
> >> t/passphrase_handling.t .... ok
> >> t/sign.t ................... ok
> >> t/sign_and_encrypt.t ....... ok
> >> t/UserId.t ................. ok
> >> t/verify.t ................. ok
> >> t/wrap_call.t .............. ok
> >>
> >> Test Summary Report
> >> -------------------
> >> t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
> >> Failed tests: 1-3
> >> t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
> >> Failed tests: 1-2
> >> Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.06 sys + 1.27
> >> cusr 0.39 csys = 1.79 CPU)
> >> Result: FAIL
> >> Failed 2/20 test programs. 5/51 subtests failed.
> >> make: *** [test_dynamic] Error 255
> >> JESSE/GnuPG-Interface-0.36.tar.gz
> >> /usr/bin/make test -- NOT OK
> >> //hint// to see the cpan-testers results for installing this module,
> >> try:
> >> reports JESSE/GnuPG-Interface-0.36.tar.gz
> >> Running make install
> >> make test had returned bad status, won't install without force
> >> Failed during this command:
> >> JESSE/GnuPG-Interface-0.36.tar.gz : make_test NO
> >>
> >> =======
> >>
> >>
> >>
> >> Thanks,
> >> Behzad
> >> _______________________________________________
> >> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> >>
> >> Community help: http://wiki.bestpractical.com
> >> Commercial support: sales at bestpractical.com
> >>
> >>
> >> Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
> >> Buy a copy at http://rtbook.bestpractical.com
> >>
> > _______________________________________________
> > http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> >
> > Community help: http://wiki.bestpractical.com
> > Commercial support: sales at bestpractical.com
> >
> >
> > Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
> > Buy a copy at http://rtbook.bestpractical.com
>
> _______________________________________________
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
>
> Community help: http://wiki.bestpractical.com
> Commercial support: sales at bestpractical.com
>
>
> Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
> Buy a copy at http://rtbook.bestpractical.com
>
--
More information about the rt-users
mailing list