[rt-users] Time Worked Report

Johan Sjöberg johan.sjoberg at deltamanagement.se
Tue Mar 29 09:56:25 EDT 2011


Do you have a /usr/local/rt3?

/Johan

From: rt-users-bounces at lists.bestpractical.com [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of Walid Haider
Sent: den 29 mars 2011 15:20
To: Kenneth Crocker; rt-users at lists.bestpractical.com
Subject: Re: [rt-users] Time Worked Report

Kenn,

Again, thanks for the reply. As I ran a packaged install of RT 3.8.4, my $home is /usr/share/rt3. My folder structure is different compared to what you mention below, as I do not have a share directory within my RT $home.

Please advise if I should create the local  directory  within /usr/share/rt3.

Thanks,
Walid

From: rt-users-bounces at lists.bestpractical.com [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of Kenneth Crocker
Sent: segunda-feira, 28 de Março de 2011 17:33
To: rt-users at lists.bestpractical.com
Subject: Re: [rt-users] Time Worked Report

Walid,

What I mean is this; it is highly recommended that any changes you make to RT code be done in a "local" version. RT will automatically look to $Home/local/.../.../ (where $home is usually opt/rt3/) for any override code that an installation may have developed. In this example (TimeWorkedReport), I copied the various /$home/share/.../... directories & files listed in the "readme' for that report into a /$home/local/.../... version/copy of those directoryies & files. I did NOT make any changes to any /share/ version of RT code. This is recommended for a couple reasons; the least of which it is easier to maintain later versions of RT without wiping out your local code (provided you keep a copy of that code). Also, industry wide for about the last 40 years, it has been considered a best practice to never mess with original code, but to provide a method that allows you to use other code instead.

So, my advice is to first; return all /share/ code to it's original state. Then create $home/local/html/Tools/Reports directories in order to copy/create the files mentioned in the "TimeWorkedReport" documentation. That's what I did:

1) If it exists,type "/opt/rt3/local/html/Elements/" <enter> otherwise, create it.
2) Copy the "delivered" file (from .../share/...) SelectQueue over to this directory with a the new name.
    A) Type "cp /opt/rt3/share/html/Elements/SelectQueue SelectMultiQueue" <enter>.
3) Replace the code in "SelectMultiQueue" with the code specified for this file from the document the "TimeWorkedReport".
4) If it exists, type "/opt/rt3/local/html/Tools/" <enter>, otherwise, create it.
5) Create new directories:
    A) Create "Reports" directory within "Tools"
    B) Get into "Reports" directory.
    C) Create "Elements" directory within "Tools/Reports"
6) Copy the "delivered" files (from .../share/...) (Tabs, index.html) over to the new directories:
    A) Copy the "Tabs" file over to "Tools/Reports/Elements":
        1) Within "Elements", type "cp /opt/rt3/share/html/Tools/Reports/Elements/Tabs ." <enter>.
        2) Go back 1 directory level to get to "/Tools/Reports".
        3) Copy the "index.html" file over to "Tools/Reports" twice:
            a) Within "Tools/Reports", type "cp /opt/rt3/share/html/Tools/index.html ." <enter>.
            b) Within "Tools/Reports", type "cp /opt/rt3/share/html/Tools/index.html TimeWorkedReport.html" <enter>.
7) Modify/Replace the code in "Tabs", "index.html" &  "TimeWorkedReport" with the code specified for these files from the document the "Time Worked Report".

Anyway, This is the procedure I followed and I had absolutely no problems AND I didn't have to worry about Production being messed up.

Also, I'm in 3.8.7 so I made sure to follow the 3.8 instructions.

Hope this helps.

Kenn
LBNL


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20110329/d01f8a57/attachment.htm>


More information about the rt-users mailing list