[rt-users] I need help with the RT-Authen-ExternalAuth LDAP settings, please
Jeff Solberg
jsolberg at intrepidls.com
Thu Oct 17 18:54:35 EDT 2013
That error code 49 is a generic LDAP error returned when the account your using to bind has invalid creds, usually a bad or expired password..
Do you have ldap tools installed on your RT server? If so run this command to test your bind account:
ldapsearch -x -W -D"bindaccount at domain.com" "(sAMAccountName=some_user)”
Enter Password of Bind account.
Let us know the results..
Jeff
From: Mathew Snyder [mailto:mathew.snyder at gmail.com]
Sent: Thursday, October 17, 2013 3:32 PM
To: Jeff Solberg
Cc: rt-users at lists.bestpractical.com
Subject: Re: [rt-users] I need help with the RT-Authen-ExternalAuth LDAP settings, please
I've tried both the settings indicated by Jeff (excepting the SSO cookie settings) and Glenn. I'm still getting the "RT::Authen::ExternalAuth::LDAP::_GetBoundLdapObj Can't bind: LDAP_INVALID_CREDENTIALS 49" error.
-Mathew
"When you do things right, people won't be sure you've done anything at all." - God; Futurama
"We'll get along much better once you accept that you're wrong and neither am I." - Me
On Thu, Oct 17, 2013 at 5:00 PM, Jeff Solberg <jsolberg at intrepidls.com<mailto:jsolberg at intrepidls.com>> wrote:
Here is a copy of my working ExternalAuth Config..Hope this helps..
#PLUGINS
Set( @Plugins, qw(RT::Authen::ExternalAuth));
#External Auth Settings
#Set($WebExternalAuth , 1);
#Set($WebFallbackToInternalAuth , 1);
#Set(WebExternalAuto , 1);
Set($ExternalAuthPriority, [ 'My_LDAP',] );
Set($ExternalInfoPriority, [ 'My_LDAP',] );
Set($ExternalServiceUsesSSLorTLS, 0);
Set($AutoCreateNonExternalUsers, 0);
Set($ExternalSettings, {
'My_LDAP' => {
'type' => 'ldap',
'server' => '10.10.x.x',
'user' => 'cn= Bind Ldap,ou=User_Logins,dc=xxx,dc=xxx',
'pass' => 'xxxxx',
'base' => 'dc=xxx,dc=xxx',
'filter' => '(&(ObjectCategory=User)(ObjectClass=Person))',
'd_filter' => '(userAccountControl:1.2.840.113556.1.4.803=2)',
# 'group' => 'cn=Domain Users,ou=Groups_Security,dc=xxx,dc=xxx',
# 'group_attr' => 'member',
'tls' => 0,
'ssl_version' => 3,
'net_ldap_args' => [ version => 3 ],
'group_scope' => 'base',
# 'group_attr_value' => 'GROUP_ATTR_VALUE',
'attr_match_list' => [
'Name',
'EmailAddress',
],
'attr_map' => {
'Name' => 'sAMAccountName',
'EmailAddress' => 'mail',
'Organization' => 'physicalDeliveryOfficeName',
'RealName' => 'cn',
'ExternalAuthId' => 'sAMAccountName',
'Gecos' => 'sAMAccountName',
'WorkPhone' => 'telephoneNumber',
'Address1' => 'streetAddress',
'City' => 'l',
'State' => 'st',
'Zip' => 'postalCode',
'Country' => 'co'
},
},
# An example SSO cookie service
'My_SSO_Cookie' => {
'type' => 'cookie',
'name' => 'loginCookieValue',
'u_table' => 'users',
'u_field' => 'username',
'u_match_key' => 'userID',
'c_table' => 'login_cookie',
'c_field' => 'loginCookieValue',
'c_match_key' => 'loginCookieUserID',
'db_service_name' => 'My_MySQL'
},
From: Mathew Snyder [mailto:mathew.snyder at gmail.com<mailto:mathew.snyder at gmail.com>]
Sent: Thursday, October 17, 2013 1:50 PM
To: Jeff Solberg
Cc: rt-users at lists.bestpractical.com<mailto:rt-users at lists.bestpractical.com>
Subject: Re: [rt-users] I need help with the RT-Authen-ExternalAuth LDAP settings, please
I found another thread that indicated that the solution to the second problem was to add @domain to the end of the username. That just reverted to the previous list of errors with a couple new ones.
Oct 17 16:47:50 zen-rt RT: [24673] Use of uninitialized value $_[1] in join or string at /usr/local/share/perl5/Log/Dispatch.pm line 42.
Oct 17 16:47:50 zen-rt RT: [24673] Use of uninitialized value $service in hash element at /opt/rt4/local/plugins/RT-Authen-ExternalAuth/lib/RT/Authen/ExternalAuth.pm line 611.
Oct 17 16:47:50 zen-rt RT: [24673] Use of uninitialized value in string eq at /opt/rt4/local/plugins/RT-Authen-ExternalAuth/lib/RT/Authen/ExternalAuth.pm line 613.
Oct 17 16:47:50 zen-rt RT: [24673] RT::Authen::ExternalAuth::CanonicalizeUserInfo returning Disabled: , EmailAddress: , Gecos: user, Name: user, Privileged:
Oct 17 16:47:50 zen-rt RT: [24673] Couldn't create user user: Could not set user info
Oct 17 16:47:50 zen-rt RT: [24673] FAILED LOGIN for user from 192.168.236.102
-Mathew
"When you do things right, people won't be sure you've done anything at all." - God; Futurama
"We'll get along much better once you accept that you're wrong and neither am I." - Me
On Thu, Oct 17, 2013 at 4:39 PM, Mathew Snyder <mathew.snyder at gmail.com<mailto:mathew.snyder at gmail.com>> wrote:
I didn't know the OU until a few moments ago so I only entered "cn=user,dc=example,dc=com". That did seem to make a difference. However, I'm still not able to log in. Perhaps for other reasons, though:
Oct 17 16:33:11 zen-rt RT: [24525] RT::Authen::ExternalAuth::LDAP::_GetBoundLdapObj Can't bind: LDAP_INVALID_CREDENTIALS 49
Oct 17 16:33:11 zen-rt RT: [24525] FAILED LOGIN for example\user from 192.168.236.102
I know I'm entering my username and password correctly and have again tried just the username, example\username, and example.com<http://example.com>\username. I'm wondering if the LDAP_INVALID_CREDENTIALS error is because of the missing OU. I do know it now, but how do I enter an OU that has two words? I was told it is example.com/Special<http://example.com/Special> Accounts.
-Mathew
"When you do things right, people won't be sure you've done anything at all." - God; Futurama
"We'll get along much better once you accept that you're wrong and neither am I." - Me
On Thu, Oct 17, 2013 at 4:27 PM, Jeff Solberg <jsolberg at intrepidls.com<mailto:jsolberg at intrepidls.com>> wrote:
For your ‘server’ try using IP rather than hostname.
Second for the ‘user’ field try using the DN name for your AD Binding user…{cn=some_user,ou=some_ou,dc=some_domain,dc=com
Hope this helps..
Jeff
From: rt-users-bounces at lists.bestpractical.com<mailto:rt-users-bounces at lists.bestpractical.com> [mailto:rt-users-bounces at lists.bestpractical.com<mailto:rt-users-bounces at lists.bestpractical.com>] On Behalf Of Mathew Snyder
Sent: Thursday, October 17, 2013 1:19 PM
To: rt-users at lists.bestpractical.com<mailto:rt-users at lists.bestpractical.com>
Subject: [rt-users] I need help with the RT-Authen-ExternalAuth LDAP settings, please
These are the settings I've started with:
Set($ExternalSettings, {
'AD' => {
'type' => 'ldap',
'server' => 'domain_controller.example.com<http://domain_controller.example.com>',
'base' => 'dc=example,dc=com',
'user' => 'rtuser',
'pass' => '********',
'filter' => '(ObjectClass=*)',
'tls' => 0,
'ssl_version' => 3,
'net_ldap_args' => [ version => 3 ],
'attr_match_list' => [
'EmailAddress',
],
'attr_map' => {
'Name' => 'sAMAccountName',
'EmailAddress' => 'mail',
'RealName' => 'cn',
},
They aren't working. Whenever someone attempts an initial login with just their username (which should create their RT account) the following error is logged:
Oct 17 15:02:29 zen-rt RT: [23131] Use of uninitialized value in string eq at /opt/rt4/local/plugins/RT-Authen-ExternalAuth/lib/RT/Authen/ExternalAuth.pm line 613.
Oct 17 15:02:29 zen-rt RT: [23131] RT::Authen::ExternalAuth::CanonicalizeUserInfo returning Disabled: , EmailAddress: , Gecos: user, Name: user, Privileged:
Oct 17 16:14:01 zen-rt RT: [24382] Couldn't create user user: Could not set user info
Oct 17 16:14:01 zen-rt RT: [24382] FAILED LOGIN for user from 192.168.236.102
When initial logins are attempted with either example\username or example.com<http://example.com>\username only the FAILED LOGIN line is displayed.
We also have our Openfire Jabber server authenticating successfully. Those settings are
ldap.autoFollowAliasReferrals = true
ldap.autoFollowReferrals = false
ldap.baseDN = dc=example,dc=com
ldap.connectionPoolEnabled = true
ldap.debugEnabled = false
ldap.emailField = mail
ldap.encloseDNs = true
ldap.groupDescriptionField = description
ldap.groupMemberField = member
ldap.groupNameField = cn
ldap.groupSearchFilter = (objectClass=group)
ldap.host = domain_controller.example.com<http://domain_controller.example.com>
ldap.ldapDebugEnabled = false
ldap.nameField = cn
ldap.port = 389
ldap.searchFilter = (objectClass=*)
ldap.usernameField = sAMAccountName
I know they don't match up exactly in terms of what Openfire calls the settings vs. what RT does, but I'm hoping someone can help me sort out what should be plugged in where on the RT side. For example, I don't know what the group_attr or group_attr_value setting should contain (if anything) in the RT_SiteConfig.pm file. Basically, anything from the "group" settings.
-Mathew
"When you do things right, people won't be sure you've done anything at all." - God; Futurama
"We'll get along much better once you accept that you're wrong and neither am I." - Me
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20131017/86b48f32/attachment.htm>
More information about the rt-users
mailing list