[rt-users] Re: FETCHM~1: MDA returned nonzero status 127

[Indika Wasala]

Hi Craig,

I uninstalled the previous version and installed the latest release
(3.0.12). But the problem is still there :-( I even replaced the
cygwin1.dll (v 1005.11.0.0) which comes with fetchmail with latest
cygwin1.dll (v 1005.12.0.0) and still no luck. (I get the same error
message.) Please try to trace the steps you followed to resolve the
problem and help me in resolving mine too.

Thanks,
Indika.

On Fri, 2004-11-05 at 21:09, Craig Ducharme wrote:
> Indika, 
> 
> You might want to try installing the latest release (3.0.12)
> http://wiki.bestpractical.com/?WindowsOSInstallGuide.
> 
> 
> Craig Ducharme
> Direct Alliance Corporation 
> Configuration Management Specialist
> 602.790.5765 Cell 
> 480.446.1483 Direct 
> cducharm at direct-alliance.com 
> www.direct-alliance.com
> 
> 
> -----Original Message-----
> From: rt-users-bounces at lists.bestpractical.com
> [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of Craig
> Ducharme
> Sent: Friday, November 05, 2004 8:04 AM
> To: indika at hsenid.lk; rt-users at lists.bestpractical.com
> Subject: RE: [rt-users] Re: FETCHM~1: MDA returned nonzero status 127
> 
> Hi Indika, 
> 
> I battled with this problem for about two days and couldn't remember the
> final resolution.  I did remember that I had to install Cygwin on the
> server in addition the actions you've already performed (change
> ownership, latest cygwin dll).  I'll work on tracing my steps to resolve
> the problem. 
> 
> Regards,  
> 
> Craig Ducharme
> Direct Alliance Corporation 
> Configuration Management Specialist
> 602.790.5765 Cell 
> 480.446.1483 Direct 
> cducharm at direct-alliance.com 
> www.direct-alliance.com
> 
> 
> -----Original Message-----
> From: rt-users-bounces at lists.bestpractical.com
> [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of
> indika at hsenid.lk
> Sent: Friday, November 05, 2004 2:37 AM
> To: rt-users at lists.bestpractical.com
> Subject: [rt-users] Re: FETCHM~1: MDA returned nonzero status 127
> 
> Hi all, 
> 
> This is the complete error message I'm getting when I run rt-mailgate, 
> 
> FETCHM~1: 6.2.5 querying alf.hsenid.lk (protocol POP3) at Fri Nov
> 04: poll started
> FETCHM~1: POP3< +OK <19442.1099647287 at alf.hsenid.lk>
> FETCHM~1: POP3> CAPA
> FETCHM~1: POP3< -ERR authorization first
> FETCHM~1: authorization first
> FETCHM~1: Repoll immediately on general at alf.hsenid.lk
> FETCHM~1: POP3< +OK <19443.1099647287 at alf.hsenid.lk>
> FETCHM~1: POP3> USER general
> FETCHM~1: POP3< +OK
> FETCHM~1: POP3> PASS *
> FETCHM~1: POP3< +OK
> FETCHM~1: POP3> STAT
> FETCHM~1: POP3< +OK 2 1626
> FETCHM~1: POP3> LAST
> FETCHM~1: POP3< +OK 0
> 2 messages for general at alf.hsenid.lk (1626 octets).
> FETCHM~1: POP3> LIST 1
> FETCHM~1: POP3< +OK 1 817
> FETCHM~1: POP3> TOP 1 99999999
> FETCHM~1: POP3< +OK
> reading message general at alf.hsenid.lk:1 of 2 (817 octets)
> #***FETCHM~1: MDA returned nonzero status 127
> not flushed 
> 
> Please help me in resolving this if you have any idea. 
> 
> > Yes. I am logged in as administrator and owner of rt-mailgate.conf is
> > also administrator (changed it from administrators to administrator)
> but
> > still no luck. :-( 
> > 
> > Regards,
> > Indika. 
> > 
> > On Thu, 2004-11-04 at 04:55, Craig Ducharme wrote:
> >> Indika,  
> >> 
> >> Are you logged in as Administrator when you execute rt-mailgate?
> >> Ownership of rt-mailgate.conf needs to be that of the user executing
> >> rt-mailgate.  
> >> 
> >> Regards,  
> >> 
> >> Craig Ducharme 
> >> 
> >> 
> >> -----Original Message-----
> >> From: rt-users-bounces at lists.bestpractical.com
> >> [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of Indika
> >> Wasala
> >> Sent: Wednesday, November 03, 2004 4:10 AM
> >> To: rt-users at lists.bestpractical.com
> >> Subject: [rt-users] FETCHM~1: MDA returned nonzero status 127 
> >> 
> >> Hi All, 
> >> 
> >> I have successfully installed rt-3.0.11.exe from
> >> http://p4.elixus.org/dist/ in a Windows 2000 advanced server machine
> and
> >> everything works fine except fetchmail which comes with the
> >> distribution.  
> >> 
> >> When I ran rt-mailgate shortcut I get the following error message
> after
> >> successfully login into the mail server, 
> >> 
> >> FETCHM~1: MDA returned nonzero status 127
> >> not flushed 
> >> 
> >> I changed the owner of the file rt-mailgate.conf to the administrator
> >> and replaced the cygwin1.dll file (in bin folder) with a latest
> version
> >> (1005.9.0.0 with 1005.11.0.0 - got this trick from a mailing list)
> but
> >> still get the above error. 
> >> 
> >> Any help would be greatly appreciated. 
> >> 
> >> Thanks. 
> >> 
> >> _______________________________________________
> >> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> >> 
> >> Be sure to check out the RT wiki at http://wiki.bestpractical.com
> >> 
> >> The information in this email is confidential and may be legally
> privileged.  It is intended solely for the addressee. Access to this
> email by anyone else is unauthorized.  
> >> 
> >> If you are not the intended recipient, any disclosure, copying,
> distribution or any action taken or omitted in reliance on it, is
> prohibited and may be unlawful. 
> >> 
> >>  
> >> 
> > 
> > _______________________________________________
> > http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> > 
> > Be sure to check out the RT wiki at http://wiki.bestpractical.com
>  
> 
> _______________________________________________
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
> Be sure to check out the RT wiki at http://wiki.bestpractical.com
> _______________________________________________
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
> Be sure to check out the RT wiki at http://wiki.bestpractical.com
>