[rt-users] Move web port

[John Buell]

Sweet! Thanks!

John Buell
Systems Administrator
Country Samper LLC
(630) 762-7806

From: rt-users-bounces at lists.bestpractical.com [mailto:rt-users-bounces at lists.bestpractical.com] On Behalf Of Aaron Guise
Sent: Tuesday, April 02, 2013 5:34 PM
To: rt-users at lists.bestpractical.com
Subject: Re: [rt-users] Move web port


Yes,

You need to add another LISTEN Directive to httpd.conf.  At the moment it will be a single LISTEN 80.  You'd need to add 8080 and then configure a virtualhost similar to this.

Mind it may need a bit of tweaking as only bashed that out from memory.

<VirtualHost *:8080>

  ServerName www.example.com:8080

  Redirect 301 / http://www.example.com/

</VirtualHost>
---

Regards,

Aaron Guise

[Image removed by sender.]aaron at guise.net.nz<mailto:aaron at guise.net.nz>

[Image removed by sender.]  [Image removed by sender.]   [Image removed by sender.]   [Image removed by sender.]

On 2013-04-03 11:26, John Buell wrote:
Right, except that I’ve already “released it to the public” with 8080, so I was just trying to find a quick way to do a redirect. A second VirtualHost listening on 8080 and serving a single web page with a redirect to 80 would seem to me to be the way to do it, or is there another way?

John Buell
Systems Administrator
Country Samper LLC
(630) 762-7806

From: Aaron Guise [mailto:aaron at guise.net.nz]
Sent: Tuesday, April 02, 2013 5:11 PM
To: John Buell
Subject: Re: [rt-users] Move web port


Hi John,

The general idea is that you would configure a virtualhost on apache as per the guides.  This would then be listening on port 80 by default.  You would then shutdown the built in/standalone server you are currently running on port 8080.  This would then mean you can access your RT on port 80 via Apache once your vhost is setup correctly.
---

Regards,

Aaron Guise

[Image removed by sender.]aaron at guise.net.nz<mailto:aaron at guise.net.nz>

[Image removed by sender.]  [Image removed by sender.]   [Image removed by sender.]   [Image removed by sender.]

On 2013-04-03 11:06, John Buell wrote:

I am using the Plack server, but if I'm reading everything correctly, I should be disabling *THAT* and modify the Apache config files to be doing the web service at port 80? Then I could use a VirtualHost directive in an Apache config file on 8080 that redirects to 80, right?



John Buell

Systems Administrator

Country Samper LLC

(630) 762-7806





-----Original Message-----

From: rt-users-bounces at lists.bestpractical.com<mailto:rt-users-bounces at lists.bestpractical.com> [mailto:rt-users-bounces at lists.bestpractical.com<mailto:rt-users-bounces at lists.bestpractical.com>] On Behalf Of Kevin Falcone

Sent: Tuesday, April 02, 2013 2:58 PM

To: rt-users at lists.bestpractical.com<mailto:rt-users at lists.bestpractical.com>Subject: Re: [rt-users] Move web port



On Tue, Apr 02, 2013 at 06:33:30PM +0000, John Buell wrote:
I've been using a stock Ubuntu 12.04 system for hosting rt. I'm at a point where I think I'd like to get rid of apache/apache2 and whatever else might be running, and let rt run on port 80 (until now it's been on port 8080). Is there a way to allow rt to listen on both, or redirect traffic from 8080 to 80 after I shut down and disable apache?

How are you running RT?  Normally, RT runs in conjunction with apache.

You certainly can run it standalone for small installs using just a plack server.  I suggest having a look at the deployment docs and figuring out your current configuration.



http://bestpractical.com/rt/docs/latest/web_deployment.html



-kevin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20130402/456a4a21/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: ~WRD000.jpg
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20130402/456a4a21/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 344 bytes
Desc: image001.jpg
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20130402/456a4a21/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 344 bytes
Desc: image002.jpg
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20130402/456a4a21/attachment-0002.jpg>