[rt-users] FTS enabled in SiteConfig, but not being enabled

Alex Hall ahall at autodist.com
Tue Nov 15 11:36:53 EST 2016


Hi all,
I found the problem. I've seen "Table" and "TableName" both used in sample
configurations, but apparently only one is correct. As soon as I switched
to "Table" in my config file, FTS enabled itself.

On Tue, Nov 15, 2016 at 11:09 AM, Matt Zagrabelny <mzagrabe at d.umn.edu>
wrote:

> On Tue, Nov 15, 2016 at 9:56 AM, Alex Hall <ahall at autodist.com> wrote:
> > Good thought, but that doesn't seem to have helped. It still says that
> > Enable and Indexed are 0 in the system configuration page.
> >
> > On Tue, Nov 15, 2016 at 10:49 AM, Martin Wheldon
> > <martin.wheldon at greenhills-it.co.uk> wrote:
> >>
> >> Hi Alex,
> >>
> >> Sounds like you may need to clear the mason cache.
>
> Clearing the mason cache only affects mason components that have been
> updated on disk.
>
> Changing configuration parameters wouldn't effect any mason components.
>
> -m
>



-- 
Alex Hall
Automatic Distributors, IT department
ahall at autodist.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bestpractical.com/pipermail/rt-users/attachments/20161115/9b2719a4/attachment.htm>


More information about the rt-users mailing list